Installing Your Cotswold Eco Tub: A Quick Guide!

Getting your Cotswold Eco Tub set up is easier than you think! Follow these simple steps and you’ll be soaking in no time:

1. Choose the Right Spot

Pick a level, stable surface—gravel, paving slabs, decking, or a concrete pad are ideal.Ensure:

• Easy access to water

• No heavy downdraft from nearby trees or buildings

2. Unpack with Care

• Keep the tub on its pallet during unpacking.

• Remove chimney sections from underneath the tub before lowering it from the pallet.

• Hot tip: If the protective plastic is tricky to peel off, warming it gently will help!

3. Set Up the Boiler

• Remove any internal packaging from the wood burner

• Attach the 90° chimney section to the outlet

• Stack flue sections from bottom to top and fit the heat guard

• Place the grate and ash tray inside the burner

• Attach the boiler door and close the drainage tap

4. Get Things Plugged In

• Plug in the tub

• Test LED lights and bubble system using the side control buttons

5. Fill It Up

• Fill the tub until water is 15 cm from the top

• Add water treatment (e.g., Clarion Spas Active Oxygen Bathing Elixir) during filling to keep water fresh

⚠️ Important: Never light the fire until the water level is above both boiler inlets at the back.

6. Fire It Up

• Use dry, kiln-dried wood (≤15% moisture)

• Start with kindling and build gradually

• Regulate heat with the air intake vent

• Do not use coal or overfill the firebox

7. Enjoy! 🛁

• Replace the lid to speed up heating

• Set up your steps for easy access

• Relax and enjoy your Eco Tub experience!

  
  

Care Tips

✅ Drain water only after the fire is fully out

✅ Use Clarion Spas Active Oxygen Elixir or correctly dosed chlorine for hygiene

✅ Rinse the tub after each use and drain during freezing weather

✅ Clean soot from the stove and flue periodically

✅ Apply wood oil once a year to maintain the exterior finish

Still have questions? We’re here to help.

📧 hello@cotswoldecotubs.co.uk📞 0333 242 3363